Apexi N1 Exhaust System (Part#161-T011) Toyota 91-95 MR2 (For Racing Only)
Product Description
Apexi N1 Exhaust System (Part#161-T011) Toyota 91-95 MR2 (For Racing Only)
PIPING DIAMETER (mm) TIP DIAMETER (mm) 91-95 MR-2 (Racing use only) 75mm-85mm 115mm 01+ MR-2 Spyder 60mm 90mm The A'pex Integration N1 exhaust system is one of the most recognizable exhausts in the import scene. It was the first angled muffler to utilize a silencer and megaphone style piping. The piping utilizes a mild steel titanium particle powder coating to flow expended exhaust gasses out through a polished SUS 304 stainless steel canister. The N1 also uses a large noticeable tip with silencer. This exhaust system has been put to the test in virtually every tuning magazine. These conclusive results have proven the N1 to be one of the most reliable, powerful, and cost effective mufflers on the market. The robotic TIG welding separates the N1 from its cheap imitators. The N1 has been used in drag, circuit, rally, and street events. Since this exhaust was created through the direct participation in the N1 Endurance Series in Japan, there is no mistaking its potential. The simple yet effective design will stand the test of time. This is truly the one, the original! Polished Stainless Steel Muffler with Optional Silencer Straightest Possible with Least Number of Pipe Bends Thoaty Sound at Wide Open Throttle Robotic TIG Welds and Rust Preventive Coating Large Aggressive Rear Tip HP & Torque: 10-12 HP/10 ft lbs Torque Installation: Hangs from the same hanger locations as the factory exhaust and comes complete with all necessary hardware and instructions. Tech Notes: Optional 90mm Super Silencers can be used to reduce noise levels by up to 7 decibels.
PIPING DIAMETER (mm) TIP DIAMETER (mm) 91-95 MR-2 (Racing use only) 75mm-85mm 115mm 01+ MR-2 Spyder 60mm 90mm The A'pex Integration N1 exhaust system is one of the most recognizable exhausts in the import scene. It was the first angled muffler to utilize a silencer and megaphone style piping. The piping utilizes a mild steel titanium particle powder coating to flow expended exhaust gasses out through a polished SUS 304 stainless steel canister. The N1 also uses a large noticeable tip with silencer. This exhaust system has been put to the test in virtually every tuning magazine. These conclusive results have proven the N1 to be one of the most reliable, powerful, and cost effective mufflers on the market. The robotic TIG welding separates the N1 from its cheap imitators. The N1 has been used in drag, circuit, rally, and street events. Since this exhaust was created through the direct participation in the N1 Endurance Series in Japan, there is no mistaking its potential. The simple yet effective design will stand the test of time. This is truly the one, the original! Polished Stainless Steel Muffler with Optional Silencer Straightest Possible with Least Number of Pipe Bends Thoaty Sound at Wide Open Throttle Robotic TIG Welds and Rust Preventive Coating Large Aggressive Rear Tip HP & Torque: 10-12 HP/10 ft lbs Torque Installation: Hangs from the same hanger locations as the factory exhaust and comes complete with all necessary hardware and instructions. Tech Notes: Optional 90mm Super Silencers can be used to reduce noise levels by up to 7 decibels.
Call us if you find a lower price and we will do our best to beat it!
204 N El Camino Real STE E #332 Encinitas CA 92024
Los Angeles, San Diego, San Francisco, Houston, Miami, Virginia Beach, New York, London, Dubai, UAE, USA, Worldwide. We sell many leading performance auto part brands such as AEM, AAM, APS, DC Sports, Defi, Greddy, HKS, Blitz, Buddy Club, Berk, Invidia, Agency Power, Sard, Enkei, Megan Racing, Ichiba, Borla, Tanabe, Strup, Tokico, Magnaflow, RSR, D2 Racing, Tein, Fujita, K&N, KYB, Tsudo.